Work smarter with #PowerDesigner – Choosing your Conversion Table

In yesterday’s blog post, I described how to convert CamelCase object Codes into ‘Proper Case’ object Names, using a combination of GTL and VBScript in a model extension. This took advantage of the built-in conversion routines, which enable us to convert abbreviations into plain language, such as replacing “acct” with “account”.

I didn’t show you how to tell PowerDesigner where to look for those abbreviations, so that’s what I’m going to do now. The secret lies with the Naming Conventions in the Model Options. There are three ways to access the Model Options:

  • near the bottom of the Tools menu
  • right-click the model in the Browser
  • right-click a blank area of a diagram

Click on the “Naming Conventions” section, then on the “Code to name” sub-tab, as shown below.  You need to do two things:

  1. Select “Enable conversions”
  2. Choose from the drop-down list of conversion tables – in the example below, I’ve chosen one of my CSV files

PDM model options - conversion table

The drop-down list of conversion tables will include entries from the following sources:

  • if you have a repository, one entry for ‘glossary terms’ (these are the Terms in the PowerDesigner Glossary)
  • CSV files that have been checked into the ‘Library’ folder in the repository
  • CSV files in the target folder(s). Click on the folder icon to the right of the drop-down to change the target folders – the default folder is “C:\Program Files\SAP\PowerDesigner 16\Resource Files\Conversion Tables”, which contains a single sample, called “stdnames.csv”, so you’ll probably want to add at least one more folder to the list.

You can edit your conversion table directly, without using Excel – just click on the ‘Edit Selected Conversion Table’ button.

edit selected conversion table

Each time you run the menu options I showed you yesterday, it will use the current conversion table. If, for example, you haven’t defined ‘BBC’ as an abbreviation, the code ‘BBCNews’ will be converted to ‘BBC News’. If you decide that ‘BBC’ should be converted to “British Broadcasting Corporation”, just add the following entry to your conversion table, and run the menu options again.

British Broadcasting Corporation BBC

Lastly, it’s worth pointing out that the Conversion table that you select on the Naming Conventions tab is used for every type of object, unless you select a different Conversion table in one of the object-specific sections. In this example, I’ve chosen a different Conversion table for Columns:

naming for columns

So, you could use different conversion tables for different types of object, if you want to.

Advertisements

Work smarter with #PowerDesigner – Converting Camel Case Codes to Mixed Case Names

Every object in PowerDesigner actually has two labels, which we refer to as the Name and the Code. The Name is the ‘business’ or ‘human’ name for an object, and the Code is a technical name for the object. The Naming Conventions allow you to automatically convert the ‘business’ names into the ‘technical’ codes, like this set of LDM attributes:

att names and codesAs well as changing the case, and replacing spaces with underscores, we can replace words and phrases with their abbreviations, using a CSV file or the PowerDesigner glossary as the source. Here are the same attributes, after changing the standard for codes to UpperCamelCase, and applying abbreviations from a CSV file.

att names and codes 2

That’s fine if you’re forward-engineering, creating technical artefacts from your models, but what if you’re reverse-engineering, and those technical names (the PowerDesigner codes) are your starting point?

When you reverse-engineer a database in PowerDesigner, the only names available are the technical names, so the PowerDesigner Names and Codes are the same. Synchronisation is automatically turned off, so you can manually edit names without accidentally changing the codes (the technical names). For example, here’s part of the model created by reverse-engineering the Demo database that gets installed with SAP SQL Anywhere 17:

 

SQL Any 17 Demo DB

The table and column names are all in UpperCamelCase. If I want to create a Logical data Model, I will need to convert them into a more human-friendly format. Out of the box, I can easily convert some standards – for example, it’s trivial to convert “SALES_REPRESENTATIVE” to “Sales Representative”. However, converting Camel Case names is not trivial. After reading a Sandhill blog entry about how to do this in ERwin yesterday, I decided to finally figure out how to do it in PowerDesigner – I’ve thought about it on and off, but never took the time to work it out. I didn’t want to do it outside PowerDesigner, as I wanted to make use of PowerDesigner’s standard naming conventions as much as possible, especially the ability to replace abbreviations with the real thing. For example, here’s part of a CSV file I was using today, which I’ll use in the next example:

abbrevsI also wanted to come up with a mechanism that was as easy to use as possible – the result is a simple model extension, that adds menu options to the model, to tables, and to columns, so you can reset the names of:

  • all tables and columns in the models
  • a selected table
  • all the columns in a selected table
  • a selected column

For example, I have a column called “BBCOrderLn”, and want to set the Name to “BBC Order Line” – “Ln” is the abbreviation for “Line” in my CSV file. With my model extension, I just right-click the column on the diagram or in the browser, and select the option “set Proper Name”,

column Proper

and the result is

column Proper after

Here’s a made-up example for a whole table:

Proper Table

How does it work? It’s based on a single model extension that contains a number of GTL templates – GTL is PowerDesigner’s Generation Template Language, which is great at turning metadata into text. One of the templates contains embedded VBScript, which is the part that does the real work. I shan’t bore you with the whole model extension here, I’ll just show you the part that converts a single column.

It includes a menu, which allows you to run the Method called “set Proper Name”, which contains a little bit of VBScriptxem proper column.

Sub %Method%(obj)
Dim candidate
candidate = obj.evaluatetemplatefor("newName","PDM-ProperCase")
 if not candidate = obj.Name then
   reportChange "Column", obj.Table.Name & "." & obj.name, obj.Table.Name & "." & candidate
   obj.Name = candidate ' need to change it
 end if
End Sub

The key part here is “evaluatetemplatefor“, which runs a shared GTL template called “newName”. Because it’s shared, I only have to define it once, and then I can use it wherever I like.proper shared templates This is a very simple template, containing a single line of GTL, which calls the standard template (.convert_code) that PowerDesigner uses to convert codes into names, changing the case and reversing abbreviations. Instead of supplying the object code to be converted, it passes the result of the other template, “ProperCase”

.convert_code(%ProperCase%," ")

“ProperCase” does the real work here, with some embedded VBscript. If you find any problems with this code, please let me know.

.vbscript(%1%)
Dim obj : set obj = activeselection.item(0)
Dim myString : myString = obj.Code
Dim ProperCase

' converts a string into Proper Case, one character at a time
' the first character is always upper case
' if an existing character is already upper case, it is not converted
' if an existing character is a space, it is output as is
' ignore underscores - convert_code will deal with them
' acronyms are left intact
' multi-word conversions only made if they're separated by a space
Dim i
Dim prevSpaceInd ' was previous character a space?
Dim prevUpperInd ' was previous character upper case?
Dim nextChar ' the next character in the string 
Dim myStringLength ' the length of myString
myStringLength = len(myString)

Select Case myStringLength
 ' If there are 0 or 1 characters, just return the string.
 Case 0
   ProperCase = myString
 Case 1
   ProperCase = Ucase(myString)
 Case else 
   ' Start with the first character - this will always be upper case
   ProperCase = Ucase(Left(myString,1))
   prevUpperInd = true ' remember this for the next character

  ' Add the remaining characters
   Dim myChar
   For i = 2 To len(myString)
      myChar = Mid(myString,i,1)

     If myChar = " " then
         prevSpaceInd = True ' remember this for the next character
         myChar = " "
     ElseIf myChar = "_" then ' ignore
         myChar = myChar
         prevSpaceInd = True ' force script to act as if it was a space
     ElseIf myChar = Ucase(myChar) then
         ' the current character is upper case
         If prevSpaceInd then ' previous character was a space
            myChar = myChar
            prevSpaceInd = False
         ElseIf prevUpperInd then ' previous character was also Upper Case
            	nextChar = Mid(myString,i+1,1)
         	If i = myStringLength then ' this is the last character in the string
            		myChar = myChar ' don't insert a space
         	ElseIf nextChar = Lcase(nextChar) then ' next char is lower case
            		' If the next character is not upper case, 
            		' assume the current letter is beginning of new word
            			myChar = " " & myChar ' make this 1st letter of new word
         		Else
            			myChar = myChar ' continue an acronym
         		End If
      		Else
        	 	myChar = " " & myChar
      		End If
      		prevUpperInd = true ' remember this for the next character
	Else ' must be lower case or perhaps a number, leave it alone
		prevUpperInd = False
		myChar = myChar
	End If
       	ProperCase = ProperCase & myChar
    Next ' i
End Select
ScriptResult = ProperCase
.endvbscript

Finally, you need to add a simple Global Script, which reports actions to the Output window:

reportChange